Timber pods
Our timber pods require a minimum of a 100mm think reinforced concrete base to 25Nmm strength. A sturdy timber deck may also be used, but be mindful that timber in contact with the ground is subject to rot and decay.
Timber garages and carriage houses
A specialist sub-contractor can install this structure. 125mm thick RC slab on 150mm thick compacted stone sub-base. We always recommend the use of 150mu damp proof membrane under the slab.
Field shelters
No base required, and by their very nature, these are constructed on galvanised steel skids that are designed to be towed around fields and paddocks to ensure your animals are always in the driest spot.
Sheds
Always choose a sheltered location that has easy access to all four elevations for installation and maintenance.
Examples of sub-bases we recommended:
- Concrete
- Flags
- Block paving
- Timber decks
Remember, it is not advisable to put timber in direct contact with the ground, as this will cause premature failure of even treated products.
10mm packers of either slate or a plastic shim will allow the timbers to drain, dry and breath.
We can provide a suitable treated timber sub-base to aid the challenges of providing structural flat and level base for you to assemble your shed or workshop. Please email info@theyorkshiretimbercompany.co.uk if you would like to add this to your order.
